Applications

 

• Remote monitoring intercom with GSM and microphone/speakers,
• Remote monitoring camera with GPRS + TF + camera extension board,
• Wechat payment slot machine scheme with the slot machine function.
• Anti-theft tracking device with GPRS + GPS and accelerometer

• Supports voice call and SMS message.
• Supports GSM/ GPRS frequency: 850/ 900/ 1800/ 1900 MHz.
• Supports GPRS data service, the maximum download data rate is 85.6 Kbps, upload data is 42.8 Kbps.
• Supports GSM07.07, 07. 05 AT commands and Ai-Thinker explosion command.
• Supports 3 serial ports, one download serial port, one AT command port.

 

• Specifications
• Size: 19.2mm x 18.8mm x 3mm
• Working temperature: -30 ℃-80℃
• Working voltage: 3.5v – 4.2v (it’s best to power by 4v)
• Power voltage: >3.5 Volts
• Low power consumption:
• Sensitivity GPIO level: 2.8 volts

Pinout

Connections

• Connect USB-TTL with 4 wires when debugging, VUSB-5V; GND-GND; AT_TX-RX; AT_RX-TX
• Or power supply by USB, then connect another three lines, GND-GND; AT_TX-RX; AT_RX-TX
• Or power by lithium battery, VBAT-(3.3v-4.2) V; GND-GND; AT_TX-RX; AT_RX-TX; (VBAT power supply, need to press power_key button for about 2s)

Power On

• A9G development board can be powered by USB or lithium battery.
• It does not require any operation when powered 1-2s.
• Please press the Rst_Key button to reset.
• The module enters AT command mode by default.

NOTE: The board needs 2A supply with 100uF and 10uF over VCC and GND

Resources

• AT Command Set Documentation
• Datasheet
• Quick Setup